Pelagic Brine-Away marine salt remover utilizes a cutting-edge organic chemical blend to assist in removing chlorides, sulfates, and other surface salts. It is recommended to be used as a maintenance wash solution as a step during surface preparation before applying primers or coatings.
Brine-Away can be applied with a pump sprayer or trigger sprayer. Do not apply below 32℉. Clean up with mild soap and water.
Shelf Life: 60 Months From Manufacturing Date
Storage: Store in a cool, dry place. Close all containers after use. Keep from freezing.
For Concentrate: Mix 3 Oz. to a Gallon of Water. Makes 11 Gallons.
See label, TDS, and SDS for complete information.
Brine-Away Ready to Use: Apply with a pump-up sprayer or, on smaller jobs, with the trigger sprayer included with the quart bottles.
Brine-Away Concentrate: 3 ounces of Brine-Away concentrate will produce a gallon of finish product. A quart of Brine-Away Concentrate will produce 11 gallons of finished product. This product does not come with a sprayer as it will need to be poured for mixing.
No. Brine-Away leaves no residue and consequently does not need rinsing.
Brine-Away can be applied down to 32℉.
Brine-Away cleans up with soap and water.
Yes. Brine-Away is compatible with all coating types.
Typical coverage is 300 – 1,000 square feet per gallon or 75-250 square feet per quart.
Yes. Brine-Away is biodegradable and contains no Volatile Organic Compounds (VOC).
Brine-Away has a shelf life of sixty months.
The chemicals in the Brine-Away solution bond with chloride and sulfate ions, etc., removing them from the surface.
No. Coatings or decals may be applied to areas where Brine-Away has been applied without issue.